0 itemsKWD 0.000

No products in the cart.

Category: FILTER CERAMIC

FILTER CERAMIC

Showing all 3 results

  • Introduction

    Now that you have bought an SB 975 water filter, you have taken the
    first step to wards protecting you and your family from the dangers of
    water-borne diseases.
    The SB 975 water filter uses a ceramic element to trap the dangerous
    bacteria which can cause diseases such as Bilharzia, Typhoid, Cholera and
    Dysentery.
    Follow the simple instructions qiven in this leaflet and your filter will
    supply you with good, clean water for many years.

    Installation

    1. Remove the filter and element (3) from their protective packaging and
      check each item against the drawing
    2. Extreme cleanliness is important. Sterilise all parts except the element
      (3) before assembly
    3. if a standard element is to be fitted boil it in water for 20 minutes before
      assembly. Boiling is not necessary with ‘Sterasyl’ elements, as they are
      self-sterilising
    4. Turn off the main water supply.
    5. Two 5mm fixing slots in the filter body (6) enable the filter to be wall
      mounted. The fixing slot centres are 112 mm.
    6. Fix the filter body (6) to the wall in a convenient position above the sink.
    7. Determine which side of the filter body (6) the tap (5) is to be connected
      and screw the plug (9A), having wound PTFE tape or similar on to it. into
      the opposite side.
    8. If the tap (5) and nipple (4) are supplied, remove the screw securing the
      tap handle. Remove the handle. Wind PTFE tape, or similar, ontc one
      end of the nipple (4) and screw it into the tap. Wind PTFE tape, or simi-
      lar, onto the other end of the nipple and screw it into the filter body (6)
      ensuring that the tap points in the desired direction. Re-fit the tap
      handle.

    NOTE:
    It is important that when installing the filter there is some form of
    isolating valve in the water supply line. This will enable element
    cleaning to take place.

    1. Place the washer (10) over the element mount.
    2. Place the element mount through the hole in the Centre of the lid (11)
      and screw the outlet spout (1) onto the element.
    3. Place the element (3) into the filter body (6) and engage the slots in the
      lid (11) on the studs (9).
    4. Secure the lid in position with the wing nuts (12).
    5. Connect the water supply to the tap (5) (if supplied), by means of a ½”
      BSP fitting
  • GOLDEN CAMEL
    FILTRE CERAMIQUE A EAU
    VOUS POURREZ EN TIRER
    LES BENEFICES SUIVANTS:

     

    • FILTRAGE TOTAL A 0.9 MICRON;

     

    • FILTER LES ALGUES,LA ROUILLE,
    LES SEDIMENTS ET LES SOLIDES
    EN SUSPENSION:

     

    • EMPECHE LA CROISSANCE ET
    LIMINE LES BACTERIES
    NOCIVES SUIVANTES A UN TAUX
    SUPERIEUR A 99.99%;
    E. COLI, CHOLERA, SHIGELLA,
    SALMONELLE,KLEBSIELLA;

     

    • REDUIT LE TAUX DE
    CRYPTOSPORIDIUM DE 99.999%;

     

    • ELIMINE 99.999% DE KYSTES
    TELS QUE LES GIARDIA;

     

    • SUPPRIME LA FILAIR DE
    MEDINE;

     

    • REDUIT TOUTE TURBIDITE;
    *NUTILISER QUE DES ELEMENTS
    DE RECHANGES AUTHENTIQUES

  • Specification :

    Body Type Plastic
    Packaging 12 Pcs /  Cartoon

    Out of stock

    SOLD OUT

    Out of stock