Required Full Time Driver Please Contact 98006966
0 itemsKWD 0.000

No products in the cart.

Category: SOLAR FLAME LIGHT

SOLAR FLAME LIGHT

Showing all 28 results

    • LED BLUBS x 3
    • USB CABLE x 1
    • EXTERNAL SOLAR PANEL x 1
    • DUAL PANEL
    • DUAL USB OUTPUT
    • BLUETOOTH
    • MP3
    • LED LIGHT
    • FM RADIO
    • SPORT LIGHT

    • LED BLUBS x 3
    • USB CABLE x 1
    • EXTERNAL SOLAR PANEL x 1
    • DUAL PANEL
    • DUAL USB OUTPUT
    • BLUETOOTH
    • MP3
    • LED LIGHT
    • FM RADIO
    • SPORT LIGHT

     

  • USAGE METHOD:

    1. Place the solar panel in a sunny place,
      Adjust the panel to maximize the power
      (let the panel perpendicular to the sun light
      at 45-90 degree.)
    2. Connect the solar panel to your device
      using the multi head USB candle.
  • USAGE METHOD:

    1. Place the solar panel in a sunny place,
      Adjust the panel to maximize the power
      (let the panel perpendicular to the sun light
      at 45-90 degree.)
    2. Connect the solar panel to your device
      using the multi head USB candle.
  • MODEL NO-DL-SP001

    1. Lamp 15-W solar
    2. Solar panel with 16′ (5 m) cod
    3. Expansion screw
    4. 60 LEDs
    5. Battery housing
    6. Motion detector head
    7. U-shaped mounting plate

     

    SOLAR PANEL: WALL OR DECK MOUNTED
    1) Secure bracket to solar panel with screw provided.
    2) Set bracket on surface and secure in place with larger screws provided.
    3) Adjust angle of solar panel to ensure it receives optimum sunlight.

    NOTE. The solar panel is equipped with a 16′ (5 m) cord so the units can be installed up to 16 (5 m) apart.

     

    LIGHT INSTALLATION
    1) Use the U-shaped mounting plate located to the rear of the light to mark where you want to install the light.
    2) Make sure this is clear of obstacles such as cables and electric lines.
    3) Secure light to the wall with screws provided.
    4 Carefully route the power cord from the solar panel to the light, and plug it into the battery housing input.
    5) Adjust the motion sensor so that it faces the area where motion is most likely to be detected. You can move it up and
    down by adjusting the screw on the neck of the motion detector.

    NOTE: Light unit should be mounted 6 1/2 to 10′ (2 to 3 m) from the ground to ensure motion detection is optimized.

     

    OPERATION
    1) Located on the front of the light there is a switch with 3 positions.
    a. “AUTO”-when the switch is in the “AUTO” position the security light will turn on automatically at night when motion is
    detected.
    b. “ON”-when the switch is in the “ON” position the light will remain on and can be used as a regular light.
    c. “OFF” when the switch is in the “OFF” position the light will remain of and will not detect any movement.
    HOW TO USE CONTROL DIALS
    The security light has 3 diferent control dials which allow you to adjust the settings.
    Sensitivity to light (Lux).
    The light duration once motion has been detected (Time).
    Sensitivity to motion (Sens).

     

    REPLACING BATTERIES.
    1 Batteries are located in the battery housing located at the front of the lamp.
    2) Remove screws from front of the battery housing to access batteries.
    3) Replace batteries with rechargeable batteries of the same type and rating.
    4) Reassemble battery housing.

     

    Ensuring the lamp is kept clean will optimize performance.
    Clean solar panel with a damp towel. Do not apply excessive pressure.
    Do not use any solvents or cleaning agents on the solar panel.

     

    Do not install close to fames or fammable gases.
    Keep away from children.
    Do not install on a unstable surfaces/position.
    Do not stare directly at the lights while they are on.
    To prevent the unit from falling, install the base unit tightly with expansion screw.
    Do not install in close proximity to other light sources.

  • Product accessories : 

    • 1 Star Lamp
    • 1 USB Line
    • 1 Copy Of Instructions
    • 1 Remote Controller

    Product parameter : 

    • Power Supply : DC 5.0V 1A
    • Power : 5W
    • LED :  (RGB ) 3*1w
    • Type c Line length : 1.5M
    • Horn Power : 4.3W
    • Bluetooth Name : XL-819

    Instructions For use :

    1. The USB interface is connected with 5V/1A power supply, put it in a suitable position,
      and turn on the switch button to start working.
    2. The projection position and angle can be adjusted by turning the Star lamp.
    3. The mode can be adjusted by the buttons above the lamp body and remote
      control, and patterns can be switched by rotating the side.
    4. To play music, you need to search Bluetooth “XL-819” on your mobile phone or
      tablet and click to play music on your paired mobile phone. You can also insert TF
      memory card and select the playing mode to play songs that can be switched by
      remote control. When using the remote control, aim the remote control at the lamp
      body and press the key to be adjusted.
    5. In the dark indoor room, it can show the best lighting effect when it is placed on the
      bed, sofa or the ground to project on to the wall or ceiling.
  • Out of stock

  • Product instruction

    1. IP65 Waterproof, Energy saving, Environmental protection.
    2. Applicable for Houses, Farms, Outbuilding, Camping. etc
    3. Sensing distance 5-8m,Sensing angle 125°:129db siren.
    4. 120days standby time. Day & Night modes.
    5. Remote distance 100m in open area.
    6. Easy wireless outdoor installation
    7. Solar rechargeable Lithium-ion battery.
    8. Alarm continue within the sensing range, and stops automatically
      after about 45seconds of person leaving.
    9. Standard each solar alarm has it’s own remote; or can customize
      it more solar alarms with a remote controller (customize matching
      remote code, please refer to manual for details)

    Operation

    • MODEL 1 (Press “A” on remote): Full day 24H siren/flashing
      Press power button for once, The LED lights will flash slowly
      for 30seconds, then sirens and lights.
    • MODEL 2 (Press “B” on remote) : Full day 24H flashing only
      Press power button for twice times, The LED lights will flash
      slowly for 30seconds,then flashing lights only.
    • MODEL 3 (Press “C on remote): Night 12H siren/flashing
      Press power button for third times, The LED lights will flash
      quickly for 30seconds, then sirens and lights.
    • MODEL 4 (Press “D” on remote): Night 12H flashing only.
      Press power button for fourth, The LED lights will flash quicky
      for 30seconds,then flashing lights only.
      5.Press the fifth times to turn off the product (Any key of remote
      long press 3seconds to turn off)
  • ELECTRICAL CHARACTERISTICS

    MODEL NO : XF-6006

    1. Solar panel: 0.88W, 17% efficiency
    2. Li-ion battery: 2200mAh
    3. Weight: 230g
    4. Size: 320*121*121mm
    5. LED: 3528*96PCS
    6. Lumens: 35 im
    7.LED span life: 50,000Hrs
    8. Solar charging time: 8Hrs
    9. Auto identify day or night
    10. Protect function: Over charging. over
    discharging. over cur rent, short circuit
    11 Li-ion battery span life: 500 circles
    12. Solar panel span life: more than 5 years

     

    PRODUCT DESCRIPTION

    Solar energy light is a new product to use solar power
    for producing electricity. This light uses high-efficiency
    solar panes, which can transform solar energy to
    electric energy and stock it into storage battery.
    Then it can provide energy to
    LED light for shining.
    The unique optical controlled
    technology can ensure the light
    auto charging in daytime. Then,
    the light can automatically
    lighten in the night. in addition,
    the light is easy to install,
    waterproof and anti-sunburn.

     

    ADDITIONAL NOTE

    1. The lamp should be charged for 5 hours under the
    sunlight before using.
    2. If there is no good sunlight in 3 months, the battery
    may be out of power. So you have to charge it with
    bright sunlight. When it’s fully charged, it can function
    normally.
    3. If the light blinks, it shows that the power is low. Thus,
    you have to charge it with the sunlight right away.
    Otherwise, the device will stop functioning soon.
    4. If there is no strong sunlight or during the winter
    season, especially at the north countries, it may take
    longer time to fully charge the device and this is a
    normal situation for solar products.

     

    PACKAGE INCLUDE

    1*LED Solar Torch Light
    1*User manual
    1* Plastic ground spike
    1*Longer ground stake

  • Product specifications

     

    Product Name: Solar Flame Light
    Product Size:90x90x145mm
    LED Lights: 96pcs,color temperature 1400K-1600K
    Battery: 1x1500mah NI-MH
    Waterproof level: IP44
    Material: Iron+ABS+PC+Electronic Components

     

    Make sure that the light is placed in a bright sunny
    location and not in a shady area

    • model no : XF-5012
    • Solar panet : Polysilicon
    • Led : RGB
    • Qty : 200 pcs / ctn
    • made in china
    • model no : XF-5011
    • Solar panet : Polysilicon
    • Led : RGB
    • Qty : 200 pcs / ctn
    • made in china

     

  • 1.Solar Panel: polycrystalline silicon 5.5V 1.5W
    2.Storage Battery: 18650 Li-ion 3.7V 1200mAh
    3.Light Source:7leds (SMD 5050)
    4.Color Temperature: RGB
    5. Working Time:8~10H Charging Time:4-6H
    6. Waterproof Level:IP65
    7.Main Material:ABS
    8.Product Size:290*95*340mm
    9.Shell Color:Black

    Function:
    1.Light control mode, no infrared human body sensing
    2.When using for the first time,press the switch. The solar panel automatically charges the battery during the day.
    3.Automatically lights up at night, and automatically turns off the lights during the day.

  • Features:
    • PIR Motion sensor and night
    sensor
    Recharged by sunlight and
    battery storage power
    * Over 12hours lighting time after
    one day sun charge

     

    PRODUCT PARAMETERS:

    1. Product name:Solar induction street light
    2. Power Supply Mode:Solar charging
    3. product material:Black ABS
    4. Application:Villa, Courtyard, Scenic spot, Plaza
    5. Function:Three Functions

    THREE-WAY LIGHTING MODES:

     

    First Work Mode
    If it is not within the sensing distance. the light will be off; if
    someone is near, the strong light will be sensed; if the person is
    away for 30 seconds, the light will be off automatically.

     

    Second Work Mode
    When no one comes the light will be weak; when someone
    approaches, the light will be strong: when someone leaves for
    30 seconds, the light will be off automatically.

     

    Third Work Mode
    Automatically bright when. is dark.
    Piease do not install it indoors. I you install it indoors for a long
    time, it will lead to power falure, which will lead to scrap.
    Please install it in a place with sun.

     

  • Product Description

    Specification:

    Solar Panel: 5V 1W Polysilicon PET panel

    Battery: 3.7V 1200mAH Lithium battery

    Material: ABS

    Charge Mode: Solar energy/DC charging

    Motion Distance: 5-8m (affected by ambient temperature)

    Charge Time: Solar>10H, DC<2H

    Remote Distance: >200m

    Working Time: Motion sensor siren 30s> 300 times, standby time >200 days, Power off> 500days

    Alarm Volume: 3 channels, 3 pcs* 129db; high frequency 12MHZ-44MHZ(Multi-segment)

    Switch: 24 hours Multi-segment high frequency siren and flashing alarm + Multi-segment high frequency siren and flashing alarm at night + 24 hours siren and flashing alarm + siren and flashing alarm at night + remote function

     

    Package Included:

    1 x LED Solar Alarm Light

    1 x Remote Controller

  • Product specification

    1. solar panel: 1.5W 5.5V
    2. Working mode: normally on
    3. led: 30pos SMD 2835
    4. Lampshade material: PC
    5. Led light color:white/warm white
    6. shell material:PC+ABS
    7. 3.7V 2200MAH battery: 18650 lithium battery 3.7V
    8. output rate:1.8W
    9. (2200-4800MAH)
    10. waterproof:.IP44
    11. lumens:400lm
  • Light mode  XF-708
    A) RGB colorful lamp
    Mode 1:7color changing automatically
    Mode 2: Stop at any color
    B) Double color lamp
    Mode 1: Pure white color lamp
    Mode 2: Warm color lamp

     

    Light control
    At sunset: power on automatically
    At sunrise: power off and charge automatically

     

    Installation
    1.Wall mounted
    2.Ground insert

    It can be widely used for many outdoor lighting
    applications, such as garden,yard,park,gutter, etc

  • Light mode
    A) GB colorful lamp
    Mode 1:7color changing automatically
    Mode 2: Stop at any color
    B) Double color lamp
    Mode 1: Pure white color lamp
    Mode 2: Warm color lamp

     

    Light control
    At sunset: power on automatically
    At sunrise: power off and charge automatically

     

    Installation
    1.Wall mounted
    2.Ground insert
    It can be widely used for many outdoor lighting
    applications,such as garden, yard, park, gutter, etc

  • About this item

    • 208 LED Solar Power Lights PIR Motion Sensor Wall Lamp Garden Waterproof Outdoor
    • Product Features: Super Bright 208 LED Solar Lights: Equipped with 208 LED super bright solar powered lights. 3 Motion Sensor Modes: The upgraded super bright 208 LED solar light have 3 modes for your diverse needs: Dim long light mode; Dim light + Strong light sensor mode; Strong light sensor mode. Sensor Angle: The updated PIR motion sensor detects people to up to 3~5 m/10~16 ft within angle of 120 degrees. Solar Lamp Eco-friendly: The 1800 mAh rechargeable lithium-ion battery for longer perio
    • Product Specification: Type Solar Motion Light Housing Material ABS Housing Color Black Light Source White Light LED 208LED Solar Panel 5.5V 1W Battery 18650 Lithium Battery 3.7V 1800mAh Waterproof IP65 Ultra-Large Illumination Range 270° Sensor Angle 90°~ 120° Sensing Distance 3~5 meters/10~16 ft Charging Time 8 hours in the sun Power Solar energy Sensor Mode Motion Sensor + Light Sensor
    • Package Includes: 1 x Solar Motion Light 1 x Screw Set 1 x Double Faced Adhesive Tape 1 x User Manual

     

    Product Description

     

    Product Features:
    Super Bright 208 LED Solar Lights: Equipped with 208 LED super bright solar powered lights.
    3 Motion Sensor Modes: The upgraded super bright 208 LED solar light have 3 modes for your diverse needs: Dim long light mode; Dim light + Strong light sensor mode; Strong light sensor mode.
    Sensor Angle: The updated PIR motion sensor detects people to up to 3~5 m/10~16 ft within angle of 120 degrees.
    Solar Lamp Eco-friendly: The 1800 mAh rechargeable lithium-ion battery for longer periods of time to meet every day lighting needs, higher Solar Efficiency up to 17%.
    IP65 Waterproof: IP65 waterproof, solar lamp works very bright. Even on rainy days it can light your garden, yard, garage, driveways, front doors, backyards, walls, etc.

     

    Product Specification:

    Type Solar Motion Light
    Housing Material ABS
    Housing Color Black
    Light Source White Light
    LED 208LED
    Solar Panel 5.5V 1W
    Battery 18650 Lithium Battery 3.7V 1800mAh
    Waterproof IP65
    Ultra-Large Illumination Range 270°
    Sensor Angle 90°~ 120°
    Sensing Distance 3~5 meters/10~16 ft
    Charging Time 8 hours in the sun
    Power Solar energy
    Sensor Mode Motion Sensor + Light Sensor

     

    Package Includes:
    1 x Solar Motion Light
    1 x Screw Set
    1 x Double Faced Adhesive Tape
    1 x User Manual

    Out of stock

    SOLD OUT

    Out of stock

  • Features & Specifications

    • Solar Wall Light with Solar Panel – HS-8013
    • Solar charging
    • Human induction
    • Energy Saving
    • 2V/6W
    • Powerful solar powered LED outdoor lights
    • Can be mounted on a wall
    • Automatically lights at night
    • Lithium Battery 1200 mAh
    • 3 Position Button Switch

    What’s in The Box

    • Solar Wall Street Lamp

    Out of stock

    SOLD OUT

    Out of stock

  • No products in the cart.